Main >> Transfercase >> Factory >> NP-208
The NP208 has a aluminum case and an appearance similar to many
other chain driven New Process transfer cases. It should have a tag on
the back saying New Process Gear, Model 208. It is chain driven
transfer case with a 23 spline input and standard round bolt pattern.
The output for the front driveshaft is on the drivers side. Low range
is around 2.62 and high is 1.00.
Full size Cherokees used the NP208 from '80-'83 and the J-trucks used
it from '80-'86 or '87. The NP208 was the "Command-Trac" option for
full size Jeeps during this time period.