Passport Plus Portable MIG Welder
Highly portable package for welders who travel for their jobs... up
ladders, down holes, through small openings... this is the breakthrough
in MIG welding you've been waiting for. The suitcase-style, 45lb,
all-in-one package carries an 8 inch spool of wire and a gas bottle!
Total weight is 55lbs with a full gas bottle and wire spool.
The Millermatic Passport Plus contains all you need to MIG weld in one
small lightweight package.
High-quality arc characteristics feature positive arc starts without
popping and spatter, high-stability low-spatter CO2 welding, and
outstanding mixed gas. Arc Control allows you to select between a crisp
arc suited for mild steel or a softer arc suited for stainless steel and
some mild steel applications.
The Passport Plus welds aluminum with the use of the Spoolmate 100
Series spool gun. Setup is quick and easy - just plug in the direct
connect spool gun, change over to argon gas and select the aluminum mode
on the front of the machine. You're now ready to weld up to 1/8 inch
aluminum on 115 V power, and 1/4 inch aluminum on 230V power. Requires
argon flowmeter with hose for using the spoolgun.
Truly innovative portable package for welding in the shop and field...
this is the breakthrough in MIG welding you've been waiting for. The
suitcase-style, 45lb, all-in-one package carries an 8 inch spool of wire
and a gas cylinder!
Self-contained gas cylinder holds 12 oz of CO2 for 25 minutes of
constant weld time, or 25 ft of welding on 3/16 in thick material with
.030 in mild steel wire. A dual-gas supply switch allows you to select
between the internal CO2 gas supply or the bulk supply when you're in
the shop or need mixed gases.
AUTOLINE POWER MANAGEMENT TECHNOLOGY
Automatically "links" the machine to a broad range of primary single-
and three-phase, 50 and 60 Hz input voltages without manually linking.
Also compensates for voltage spikes and drops within the entire range.
Delivering consistent output - All done without removing the covers to
Fan-On-Demand Internal power source cooling system that only works when
needed, keeping internal components cleaner.
Internal air flow that protects electrical components and PC boards from
dirt, dust, debris... greatly improving reliability.
Exclusive LVC Line Voltage Compensation - Keeps output of the power
source constant regardless of fluctuation in input power + or -10%.
Built-in Contactor - For your safety, our built-in contactor makes wire
electrically "cold" when not welding.
Multi-Voltage Plug (MVP) - The unique MVP power adapter plugs allow you
to easily change between 115 and 230 V power. Simply choose the plug
that matches your power receptacle, attach it to the power cord and
you're ready to weld. The machine will automatically adjust to the
proper voltage - no tools, no hassles!
Miller's exclusive Auto-Line Technology provides state-of-the-art
flexibility, automatically connecting to 115 or 230 VAC, single-phase
Miller's exclusive Multi-Voltage Plug (MVP) allows you to plug into
either 115 or 230 V power. Just choose the plug that fits your
receptacle and attach it to the power cord - no tools required!
Impact resistant case provides strength and durability, protecting the
internal components and welding wire.
COMES COMPLETE WITH
- Welding power source
- Power cord and adapter plugs for 115V or 230V outlets
- 10 ft. (3m) M-10 MIG gun and cable assembly
- 10 ft. (3m) work cable and clamp
- One 12 oz. (paintball style) CO2 gas cylinder (empty)
- Two extra contact tips for .024 and .030 diameter MIG welding
- Dual-groove, quick-change drive rolls of .024 in or .030/.035 in
MIG welding wire.
- Weld thickness - 24 gauge to 3/8" mild steel (230V)
- Processes - MIG or Flux Cored Arc Welding
- Input power - 115 Volt, 20 Amps, 60 Hz single phase OR 230 Volt,
18 Amps, 60 Hz single phase
- Rated output - 150 Amps at 21.5 Volts, 20 percent duty cycle
(230 Volts input), 110
- Amps at 19.5 Volts, 20 percent duty cycle (110 Volts input)
- Amperage range - 30-140 Amps (115 Volts), 30-180 Amps (230
- Weight - 45 lbs.