Millermatic Passport Plus Portable MIG Welder
Revolutionary all-in-one MIG package that is truly portable - ultimate arc performance, self-contained gas bottle, and flexibility to plug into 115 or 230 V power.
Highly portable package for welders who travel for their jobs... up ladders, down holes, through small openings... this is the breakthrough in MIG welding you've been waiting for. The suitcase-style, 45lb, all-in-one package carries an 8 inch spool of wire and a gas bottle! (55lbs with a full gas bottle and wire spool.)
The Millermatic Passport Plus contains all you need to MIG weld in one small lightweight package.
High-quality arc characteristics feature positive arc starts without popping and spatter, high-stability low-spatter CO2 welding, and outstanding mixed gas. Arc Control allows you to select between a crisp arc suited for mild steel or a softer arc suited for stainless steel and some mild steel applications.
The Passport Plus welds aluminum with the use of the Spoolmate 100 Series spool gun. Setup is quick and easy - just plug in the direct connect spool gun, change over to argon gas and select the aluminum mode on the front of the machine. You're now ready to weld up to 1/8 inch aluminum on 115 V power, and 1/4 inch aluminum on 230V power. Requires argon flowmeter with hose for using the spoolgun.
Truly innovative portable package for welding in the shop and field... this is the breakthrough in MIG welding you've been waiting for. The suitcase-style, 45lb, all-in-one package carries an 8 inch spool of wire and a gas cylinder!
Self-contained gas cylinder holds 12 oz of CO2 for 25 minutes of constant weld time, or 25 ft of welding on 3/16 in thick material with .030 in mild steel wire. A dual-gas supply switch allows you to select between the internal CO2 gas supply or the bulk supply when you're in the shop or need mixed gases.
Miller's exclusive Auto-Line Technology provides state-of-the-art flexibility, automatically connecting to 115 or 230 VAC, single-phase power.
Miller's exclusive Multi-Voltage Plug (MVP) allows you to plug into either 115 or 230 V power. Just choose the plug that fits your receptacle and attach it to the power cord - no tools required!
Impact resistant case provides strength and durability, potecting the internal components and welding wire.
COMES COMPLETE WITH
Welding power source
Power cord and adapter plugs for 115V or 230V outlets
10 ft. (3m) M-10 MIG gun and cable assembly
10 ft. (3m) work cable and clamp
One 12 oz. (paintball style) CO2 gas cylinder (empty)
Two extra contact tips for .024 and .030 diameter MIG welding wire
Dual-groove, quick-change drive rolls of .024 in or .030/.035 in MIG welding wire.
Weld thickness - 24 gauge to 3/8" mild steel (230V)
Processes - MIG or Flux Cored Arc Welding
Input power - 115 Volt, 20 Amps, 60 Hz single phase OR 230 Volt, 18 Amps, 60 Hz single phase
Rated output - 150 Amps at 21.5 Volts, 20 percent duty cycle (230 Volts input), 110 Amps at 19.5 Volts, 20 percent duty cycle (110 Volts input)
Amperage range - 30-140 Amps (115 Volts), 30-180 Amps (230 Volts)
Weight - 45 lb.