Sometimes one tow strap is not long enough to reach from the recovery vehicle to the stuck vehicle and it’s necessary to combine multiple tow straps into one long length. So how do you do that? What you DON’T want to do is use a D-ring, which could become a deadly weapon if a strap were to break loose. Combining two loops by interlooping the ends of each strap into the other strap may seem like an easy idea until you have to separate them later after a hard pull. Save yourself a headache later by using this tip.
After the hard pull yanking thousands of pounds of 4×4 out of a situation, the two tow straps will easily slip out of the other straps loop.
Consequently if you do not do this the tow straps can become so tightly bound together that you may not be able to separate them without risking damage to the straps and your two 30 foot straps will become one 60 foot strap.
In addition to easy separation, the magazine is so light that if something breaks during the yanking, there’s less chance of damage or injury.
It should go without saying but NEVER use a D-ring to connect two straps. The D-Ring will become a projectile that could result in serious injury, death or at the very least, vehicle damage if a strap or tow point breaks and one side of the combine straps goes flying.